• Introduction
• How to work
• Installation
• Maintenance
• Cases

Latest Technical Support of Impact crushers

Impact crushers Processing stage: secondary crushing

Impact crushers Crushing material: limestone, gypsum, talc etc.

Impact crushers Crushing ratio: 10-20

Impact crushers Main components: body frame, rotor, impact rack

Impact crushers Quickwear parts: high manganese steel, high chromium steel
 
Impact Crushers Working PrincipleThe materials are crushed via impact energy produced in the impact crushers. When the materials enter the zone of the board hammer, they are flung into the Impact crushers equipment via the high-speed impact of the board hammer. These materials will be re-crushed after rebounding into the scale board. The large materials are crushed into small pieces until Impact crushers becomes the specified granularities. The end products come out from the base of the impact crushers.Impact crushers is the ideal machining equipment for aggregate for high-class highway pavement and construction of hydropower facilities. With excellent capacity and performance, the impact crushers is widely used in machining of reduced stone for highway construction, hydraulic engineering and architecture, etc.

Impact crushers crushing materials with impact force. When materials enter,crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush.Then materials will be shot back to the blow bar again for the third crush. Process repeats until the materials are crushed to the required size and discharged from the lower part of the Impact crushers machine. Size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. Impact crushers employs self-weigh security device in its back frame.

When other objects enter the Impact crushers impact cavity, they will be forced out of the machine by the impact rack in the front and back of the Impact crushers machine.Impact Crushers Work NoticeImpact Crushers is a important crusher equipment in stone crusher line, in the process of using the Impact crushers,firstly pay attention to the safe operation:When the impact crushers machine operating, the staff can’t stand within the role of inertial forces, electrical switch installation should avoid this location.When the impact crushers machine is running, strictly forbid to open the observation door to check the situation, strictly prohibit any adjustment, cleaning, maintenance, etc. to avoid danger.strictly prohibited pour the material can’t be broken into the impact crushers in order to avoid damage to the Impact crushers machine.When the impact crushers is in overhaul, the first is to cut off the power.prohibited work overload.Impact crushers electrical equipment should be grounded, insulated wire should be reliable, and packed in snakeskin tube.

Thank you for your interest in YiFan. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail：yifanseo@yfmac.com
MSN On line: yifancrusher@yahoo.cn
ICQ: 639607958 QQ: 2502761202
Tel: +86-371-64628852 Fax: +86-371-64628872
The article by Vertical Shaft Impact Crusher,Impact Crushers Yifan Machinery Editor: http://www.impactcrushers.org/, please indicate the source , little effort , thank you .